UPDS-232RIMS UPTIME DEVICES RS-232 RIMS ( 1 Port ) Environmental Monitoring Sensor

UptimeDevices Sensor-RS232RIMS

Description:

RS-232 RIMSRemote Intelligent Multi Sensors (™ Pending) Don’t spend money replacing power strips with newer and more expensive IP addressable models. Using the RS-232 RIMS, you can web enable and control your current power strips. The RS-232 RIMS connects to your power strip’s RS-232 port and reports power variable information to the RPM Console Manager (CM). The RS-232 RIMS, with most power strip models, can also turn on/off/reboot individual receptacles. It can also be programmed to automatically send out a command to the power strip during an alarm condition. For example, if the temperature is too high the RS-232 RIMS can automatically turn off a server before it overheats. Each RIMS is a Daisy Chain Sensor™, so multiple RIMS can be plugged into any RPM Console Manager (CM) sensor port. RIMS can be up to 1000 ft. away from the RPM CM with no external power needed. Because each RIMS can store its own readings, there is no data logging delays. Each RIMS has a battery backed clock so you can be assured each data point is properly recorded. RIMS generate events when internally monitored thresholds are broken. The events are communicated by the RPM CM via e-mail, SNMP trap, or SMS modem. The RPM CM stores alarm logs and graphs the RIMS stored data.

Features:

• Monitor & Control approved third party
power strips• Temperature sensor included (Celsius, Fahrenheit, or Kelvin scale)

• Daisy Chain Sensors™ (RIMS) can be plugged into any
RPM Console Manager (CM) sensor port

UptimeDevices Sensor Typical setup

Specification:

RS-232 RIMSRemote Intelligent Multi Sensors (™ Pending)

• Daisy Chain Sensors™ (RIMS) can be plugged into any
RPM Console Manager (CM) sensor port

**Please note this unit " Sensor " has to be used with the Uptime Devices - RPM ( Remote Physical Monitor ) Unit. see compatible products link.