AT-MC102XL-30 Allied Telesis 100TX to 100FX (SC) standalone media converter

AT-MC102XL

Description:

The Allied Telesis range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre. When connecting media converters to autonegotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. Alternatively, the MissingLink feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, as a failure in one fibre link will be signalled to the switch, allowing the second link to become active. Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This 'Link Test' feature allows installers to check for cable faults without the need for expensive fibreoptic test equipment. Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. Media converters allow you to connect disparate cable types in your network. Media conversion offers you the ability to: - Extend network distances by adding fiber only where it is needed - Add new devices without replacing costly cable - Keep pace with changing technology - Integrate high-bandwidth devices into the network

Features:

- Converts Copper Fast Ethernet to Multimode fiber
- Operates under all traffic loads
- Fanless design
- Auto MDI/MID-X Copper Port
- MissingLink™ Support
- Transparent to jumbo packets and VLAN tagged packets
- Fiber Link Test Function
- Industry-standard fiber SC connector



Specification:

Manufacturer Information
Manufacturer Allied Telesis
EAN 0767035123431


Connectivity
Cabling technology 100TX/100FX
Connectivity technology Wired
Data transmission
Data transfer rate (max) 100 Mbit/s
Energy management
Power consumption (typical) 6 W
Networking
Data link protocols Fast Ethernet

Operational conditions
Operating relative humidity range 5 - 95 %
Storage temperature range (T-T) -20 - 80 °C
Operating temperature range (T-T) 0 - 40 °C
Ports & interfaces
Connector(s) SC

Certificates
Safety UL-Cul, CSA/CSA, NRTL, TUV, CE
Electromagnetic emissions FCC Class B
Technical details
Source data-sheet Icecat.biz
Weight & dimensions
Dimensions (WxDxH) 105 x 95 x 25 mm
Weight 294 g

compatible products

POA - please ...order by telephone/email/fax

Qty: